What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 01:18
One is “what exactly is in a ‘surge protector’ ? ”
There are two important concepts here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
FDA Gives Tomato Recall Over Salmonella Highest Risk Warning - TODAY.com
Now when you have a certain ac resistance, then a current flows in a loop.
In schematic diagrams this is the symbol for a fuse:
The MOV will conduct when the voltage exceeds 50% of line voltage.
There are three different concepts here that are getting confused.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
[old diagram got deleted by accident]
Do flat Earthers really exist? Why do they believe the Earth is flat?
This is 'the assistant's answer'
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then describes the function of a fuse.
This device then solves the entire problem.
But it can get overloaded, and no longer works.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Bowel Cancer in Young People Is Rising – Here's How to Reduce Your Risk - ScienceAlert
This one hit behind the barn.
First Sentence:
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is lightning?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
MongoDB (NASDAQ:MDB) Reports Strong Q1, Stock Jumps 14.3% - Yahoo Finance
Here is a simplified AC power diagram.
a photo is worth a thousand words.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Similarity in long‑term romantic couples probably matters less than we think - PsyPost
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
One
so, what happens?
Everything Apple Announced at WWDC 2025 - WIRED
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Barnstars:
but I think this circuit , shows a few more pieces.
5 foods to consume empty stomach to stabilize blood sugar levels naturally - Times of India
2024–10–16 [ OO OLAOYE OYEBODE ]
Upvotes:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
the problem then depends on "how fast does the fuse operate?".
Because the load is inductive, the current lags the voltage.(by a bit).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is where the MOV conducts again, and dissipated the energy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes Rainy Season and Lightning.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
eight
He then asserts :
A circuit breaker is similar, but is resettable.
An AC voltage/ current source, and an ac inductive load.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
I post the exact comment here.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
nine
2024–10–10[John johnson John Johnson ]
what exactly is a ‘surge’ protector?
It seems Mohan does not understand the difference between a comment and an Answer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
(Dc diagram shown, AC is similar).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What does a fuse do?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–14 [Omar Gharbi Omar Gharbi ]
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The other is “what does a “fuse” do?”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but this device (an Inductor) … impedes the rapid changes in the current.
But… the neutral is now “floating” because of the 1 ohm resistance.
The bolt then partially travels down the line to your home.
At least they know the answer if they wanted it.
[image of Common-mode choke]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Edit 2024–10.
The third is lightning and “how it gets conducted into a home.”
These devices are installed between the “hot” and “neutral” and protective ground.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.